Pussy-Bow Blouse, Sewing, Vogue Sewing Patterns, Vogue V8772

Sewing: Pussy-Bow Blouse

This blouse took a lot longer than my previous projects,  partly due to spending all last weekend at our daughter’s dance show and partly because this was more complex than anything I have already made, so I took my time to make sure I got it right. IMG_1335 I used Vogue V8772.  I really wanted to get a good fit with this blouse, so I carefully compared my measurements to those on the pattern.  I made a bust adjustment to move the bust dart up one inch and I shortened the length of the bodice so I can wear it  untucked or tucked in, depending upon what I am wearing it with. Other than that, it was as per the pattern. The construction of the bodice and the tie were both pretty simple and I made this up fairly quickly. IMG_1334 IMG_1360 IMG_1339 I knew that the sleeves would be a bit more challenging.  The first tricky bit was understanding what a ‘continuous lap’ is.  I checked out a couple of really helpful videos that showed exactly how to attach it.  It’s effectively a binding that goes around the slit at the cuff.  Here’s a picture of the completed continuous lap. IMG_1359 It’s difficult to see as it is in the same fabric.  I managed to catch some fabric in the piece at the top of the slit, so had to unpick it and re-do that part just once, so not too bad for a first attempt and it looks fairly neat. The next tricky part was the cuff.  It was easy enough to construct, but I must have measured incorrectly, so one of them did not have enough circumference to fasten!  A quick unpick and re-cut and it was soon matching the other cuff. I got to the point where the entire blouse was constructed and I just had the button holes and buttons to finish.  That was a bit scary as I could have ruined the whole project at this point!  I have not attempted button holes for at least 20 years, so the discarded cuff came in as a great piece to practice them on.  After around 10 practice attempts, ensuring that I had the length of the button hole just right to fit the button, I took a deep breath and went for it.  Eleven button holes later, the blouse was almost complete.  I finished sewing on the buttons and was able to wear it with my jeans to my Dad’s 70th birthday dinner. I’m really pleased with the finished project.  As I took my time, it is nice and neat – even on the inside!  It’s such a great feeling wearing something that you have made yourself.  It’s so nice to have such a good fit and I’m really pleased with the fabric colour too – one of my favourite shades.

IMG_1358 IMG_1361 IMG_1567

Here is the last button just being stitched on and the completed blouse.  I’m off to make a skirt pattern now.  It has been drafted by Kate of FabricKated, so I’ll report back on how that goes.  You can see a glimpse of it here with my blouse – it’s not finished yet – I’ve got to add the lining, but couldn’t wait to try it on!

Advertisements
Standard

7 thoughts on “Sewing: Pussy-Bow Blouse

  1. Pingback: Sewing: Experimenting with different fabrics | Lyn Bromley at First Impressions

  2. Pingback: Sewing: Curvy Pencil Skirt | Lyn Bromley at First Impressions

  3. What a beautiful job you have done Lyn. Your alterations are fantastic and I can see that the bust dart is much better than on RTW. The colour is gorgeous and you have done yourself proud. I am really impressed. Looking forward to seeing the skirt!!

Please Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s